Sahara Enterprises

Solid low-alloy copper wire suitable for soldering, under A gaseous protection of Ar/CO2 mixture, in all positions of construction steels resistant to atmospheric corrosion: COR-TEN A, COR-TEN B, PATINAX, RESCO, ITACOR, etc. Excellent surface finish of the wire, excellent flow excellent welding characteristics Copper-plated low-alloyed solid wire to be used for welding under protection of gas Ar/CO2 mixture, in all positions, of steels resistant to atmospheric corrosion, like CORTEN A, COR-TEN B, PATINAX, RESCO, ITACOR, etc. Excellent nisch surface nisch, excellent feeding in torches and excellent welding features

Solid wire for welding, under Ar/ CO2 protection of A low alloy 0.5% Mo steels resistant to hot creep and grain steels with high elastic limit. Suitable for construction of pressure vessels and pipelines, subjected at operating temperatures up to 500°C. Good values ​​of resilience to low temperatures. Solid wire forwelding 0.5%Mo low-alloyed steels, resistant to hot ne-grained steels with high elastic limit, underprotection of gas Ar/ CO2 mixture of Suitable for the construction of pressure vessels, pipes, submitted to operating temperatures up to 500°C. Good values ​​of resilience at low temperatures
   

Ni-Mo-Cr bonded low solid wire suitable for A welding in all positions, of high-strength steels and steels grain construction of the type T1, T1A, T1B, HY80, HY90, N-A-XTRA 55-60-65-70, WELDOX 700, under protection of Ar/CO2 mixture. Good toughness characteristics even at low temperatures Up to -40°C. It is used in welding of earthmoving machines, crane arms, etc. Ni-Mo-Cr low-alloyed solid wire suitable for welding in all positions, under protection of Ar/CO2 mix, of steels with high resistance and ne-grained construction steels type T1, T1A, T1B, HY80, HY90, N-A-XTRA 55-60-65-70, WELDOX 700. Good resistance also to low temperatures down to -40°C. It is used to weld components for earthmoving machines, crane booms, etc.

Solid copper wire used for welding under protection of A CO2 gas or Ar/CO2 mixture. Of general use, suitable for joining aluminium-steel carbon type S355 A516 Gr60, etc. Stable arch, cords of excellent appearance, reduced spatter formation. To be used in general carpentry, tanks, bodywork, etc. Copper-plated solid wire for welding under protection of CO2 gas or Ar/ CO2 mixture. Suitable for the joint of unalloyed carbon steels S355, A516 Gr60, and similar. Stable arc, bead of excellent appearance, extremely reduced spatter. To be used for steel structures in general, coachwork, etc

The ECOBRONZE is made using selected raw materials based on their chemical properties. Shiny gold in colour, it has a coated surface with a BRONZE based film. The special chemical solution used in the manufacturing process (a combination of copper, zinc and tin sulphate) allows you to obtain a compact and clean thread surface, which will give a cord clear and spatter-free welding process, with a reduction in the consumption of sheaths and tips guide it, and a clear reduction in fumes. ECOBRONZE finds speci ca application in the robotic welding process even with high amperages very high deposit speeds. Use of the copper SG2 is comparable to normal use. The ECO BRONZE wire, is made using selected raw materials according to their chemical properties. Shiny gold color, the surface coated with a base of BRONZE lm. The special chemical solution used in production process (a combination of copper sulfate, zinc and tin), it allows to obtain wire with compact and clean surface, which will give a clear weld bead and free from spatters, with a consumption reduction of contact tip and an evident reduction of welding fumes. ECO BRONZE wire nds particular application in robotic welding process also with high amperage at very high deposition rate. The use is comparable to common copper-coated SG2 wire.

Solid copper wire used for welding under protection of A CO2 gas or Ar/CO2 mixture. Of general use, suitable for joining aluminium-steel carbon type S355 A516 Gr60, etc. Stable arch, cords of excellent appearance, reduced spatter formation. To be used in general carpentry, tanks, bodywork, etc. Copper-plated solid wire for welding under protection of CO2 gas or Ar/CO2 mixture. Suitable for the joint of unalloyed carbon steels S355, A516 Gr60, and similar. Stable arc, bead of excellent appearance, extremely reduced spatter. To be used for steel structures in general, coachwork, etc

The ECOBRONZE is made using selected raw materials based on their chemical properties. Shiny gold in colour, it has a coated surface with a BRONZE based film. The special chemical solution used in the manufacturing process (a combination of copper, zinc and tin sulphate) allows you to obtain a compact and clean thread surface, which will give a cord clear and spatter-free welding process, with a reduction in the consumption of sheaths and tips guide it, and a clear reduction in fumes. ECOBRONZE finds speci ca application in the robotic welding process even with high amperages very high deposit speeds. Use of the copper-plated SG2 is comparable to normal use. The ECO BRONZE wire, is made using selected raw materials according to their chemical properties. Shiny gold color, the surface coated with a base of BRONZE lm. The special chemical solution used in production process (a combination of copper sulfate, zinc and tin), it allows to obtain wire with compact and clean surface, which will give a clear weld bead and free from spatters, with a consumption reduction of contact tip and an evident reduction of welding fumes. ECO BRONZE wire nds particular application in robotic welding process also with high amperage at very high deposition rate. The use is comparable to common copper-coated SG2 wire

The new ELB-SG3 Salution 3 thread is obtained from a careful selection of raw materials based on the highest degree of strength and ductility. - Non-coppered solid wire with greater manganese and silicon. - Excellent welding performance - Thread with better smoothness - Low smoke emission Current Current DC+ Diam. 0.8 1.0 1,2 1.6 The new ELB-SG3 Solution 3 wire is Manufactured by on accurate selection of prime raw material according to their resistivity and ductility. - "Copper free" welding wire with increased Mn and Si - Excellent welding performance - Enhanced feed ability wire - Low fumes emissions

Ni-Mo-Cr bonded low solid wire suitable for welding, A under protection of Ar/CO2 mixture, in all positions high strength steel and grained structural steels ne of the type T1, N-A-XTRA 55-60, WELDOX 630, or S275 / S550. Good toughness characteristics even at low temperatures not at -40°C. Suitable for welding machine components earthmoving, crane arms, etc. Ni-Mo-Cr low-alloyed solid wire suitable for welding in all positions, under protection of Ar/CO2 mixture, of steels with high resistance and ne-grained construction steels like type T1, N-AXTRA 55-60, WELDOX 630 or S 275, to S 550. Good resistance also to low temperatures down to -40°C. It is used to weld components for earthmoving machines, crane booms, etc.