Sahara Enterprises

For arc welding aluminums alloyed with copper, silicon, and magnesium.Also excellent for joining dissimilar grades of aluminum.     

SARAWELD -4XXX 12% Silicon aluminum arc welding electrode with exclusive self lifting slag. Other aluminum grades such as Al 99, Al Mn, etc. are also available.

Ÿ Unique self lifting slag.

Ÿ Pure white long shelf life extruded flux coating outlasts conventional products in moisture resistance.

Ÿ Can be manufactured in a variety of custom colors.

Ÿ Available in hermetically sealed PURE ALUMINUM pull ring cans or vacuum packed foil bags for extended shelf life.

Ÿ Also available in TIG form as item code 6047, in MIG form as item code 7091 and as a bare torch brazing alloy as item code 2191.

Flux Color: White or Custom Colors

Undiluted Weld MetalMaximum Value Up to:

Tensile Strength 36,000 psi (250 MPa)

Yield Strength 20,000 psi (150 MPa)

Elongation 14%

Suitable for joint welding of aluminium alloys from 5000 and 6000 series.
Anodizing quality allows excellent anodizing properties. Very good resistance to corrosion, especially in seawater and marine and industrial atmosphere  

SARAWELD 4043 is 5% silicon all position aluminum weld wire used to weld heat treatable alloys such as the 6XXX base metals and cast alloys. Found in many common welding applications such as bicycles, trucks, trailers, automotive parts and equipment. Silicon with this alloys give improved wetting action yielding a less crack sensitive bright weld bead  

Er5356 Alumunium Filler Wires   

Application:

• ER5356 materials are used mainly for welding aluminum of like composition. This type is also useful if color match is important after anodizing.

• The proper choice of aluminum filler metal mainly depends on the base metal properties to be achieved andwelding technique. Post weld cracking, corrosion resistance and behavior under elevated temperature also needto be taken into consideration.
• Cracking usually can be minimized by choosing a filler metal alloy of higher alloy content then the base metal.

 

Composition:

• Deposited Chemical Composition % (Typical)
• Deposited chemistry is influenced by many factors so no typical analysis can be reported.
• Deposited All Weld Metal Properties %
• As-Welded
• Deposited all weld metal properties are influenced by many factors such as weld process used, so no typical weld metal properties can be reported.

Er4047 Aluminum Filler Wires Aluminum wires and rods for welding and brazing. Good mechanical characteristics, their excellent corrosion resistance and low melting point ensure a very low number of deformations in the origin metal. This material is generally used for brazing aluminum sheets, for extrusions and castings. (After anodizing the welding will be of a different colour)   

Chemical composition:


Minimal Values of the Mechanical Properties (Welded Metal):

Bare
Elongation 25%   

Er5183 Aluminum Filler Wire

Application:

• ER5183 can be used on type base materials 5083 and 5456. Not recommended for sustained elevated temperature service. Assure proper storage to avoid contamination.

• The proper choice of aluminum filler metal mainly depends on the base metal properties to be achieved andwelding technique. Post weld cracking, corrosion resistance and behavior under elevated temperature also needto be taken into consideration.
• Cracking usually can be minimized by choosing a filler metal alloy of higher alloy content then the base metal.

 

Composition:

• Deposited Chemical Composition % (Typical)
• Deposited chemistry is influenced by many factors so no typical analysis can be reported.   

Manufacturer of a wide range of products which include Welding Electrodes, Mild Steel Electrodes, Stainless Steel Electrodes, Hardfacing Electrodes and Low Hydrogen Electrodes.     

Er4043 Aluminum Filler Wire

ER4043 Aluminum filler materials are silicon types for welding of 2014, 5052, 6061, 6101 and 6063. Use with DC Reversed Polarity (DCEP). shielding gas, ARGON, is required.
   
Typical uses include: Truck bodies, pressure vessels, structural members, petroleum distribution equipment.

SARAWELD 4047 is 12% silicon all position aluminum weld wire used to weld heat treatable alloys such as the 6XXX base metals and cast alloys. Found in many common welding applications such as bicycles, trucks, trailers, automotive parts and equipment. The higher silicon with this alloy give improved wetting action yielding a less crack sensitive bright weld bead and also a narrow melting range which will reduce the shrinkage during cooling   

SARAWELD 5183 is similar to 5356 with 5% magnesium aluminum filler typically used on similar base metal as the 5356 but may give higher strengths on such base metals like 5083 and other magnesium containing base metals   

Saraweld ER 4043 is an aluminum alloy welding electrode that is classified as AWS A5.10 ER4043. It is a 5% silicon aluminum alloy that is used for welding heat-treatable aluminum alloys, such as the 6XXX series base metals and cast alloys. Saraweld ER 4043 is known for its good wetting action and its ability to produce less crack-sensitive weld beads. It is commonly used in welding applications such as bicycles, trucks, trailers, automotive parts, and equipment.

Here are some of the key features of Saraweld ER 4043:

• AWS A5.10 ER4043 classification
• 5% silicon aluminum alloy
• Good wetting action
• Less crack-sensitive weld beads
• Suitable for welding heat-treatable aluminum alloys
• Commonly used in welding applications such as bicycles, trucks, trailers, automotive parts, and equipment

If you are looking for a high-quality aluminum alloy welding electrode for welding heat-treatable aluminum alloys, Saraweld ER 4043 is a good option.   

SARAWELD 5356 is a 5% magnesium all position non-heat treatable wire used to weld the 5XXX series alloys with some common welding applications such as boats, ships, bicycles, trucks, pressure vessels, automotive parts and equipment.  

SARAWELD 1100 is 99% aluminum filler typically used on similar base metal such as 1060, 1070, 1080, 1100, 1350 and 3003 N